SPECIAL SESSION #21

Alfiero Leoni

University of L'Aquila, Italy

• alfiero.leoni@univaq.it

Gianluca Barile

University of L'Aquila, Italy

• gianluca.babrile@univaq.it

Riccardo Olivieri

University of L'Aquila, Italy

• riccardo.olivieri1@graduate.univaq.it

Additive manufacturing technologies are rapidly transforming the way electronic circuits, sensors, and embedded systems are conceived, fabricated, and tested. Beyond traditional printed electronics, the use of 3D printing (FDM, multi-material deposition, conductive filaments, hybrid structures) enables the fabrication of fully three-dimensional functional devices with customized geometries, integrated wiring, conformal sensors, and mechanically robust architectures. These emerging approaches unlock new opportunities for rapid prototyping, smart objects, wearable systems, industrial monitoring, IoT nodes, and low-cost or disposable instrumentation.

This Special Session aims to gather contributions on materials, processes, design methodologies, characterization techniques, and metrological validation of 3D-printed electronic circuits and sensors.

Topics of interest include, but are not limited to:

• Conductive and functional materials for additive electronics;
• Multi-extrusion FDM systems for electronic manufacturing;
• 3D-printed sensors (mechanical, environmental, chemical, optical);
• Embedded circuitry, antennas, and interconnects;
• Metrology, reliability, and standardization of printed devices;
• Hybrid manufacturing combining additive, subtractive, and PCB technologies;
• Applications in Industry 4.0, IoT, robotics, wearables, and smart structures.

Alfiero Leoni is an Assistant Professor at the University of L'Aquila, Italy, with expertise in digital and mixed-signal integrated system design. His research interests span low-power energy harvesting circuits and systems, analog and mixed-signal sensor front-end and sensor systems, and 3D-printed sensors. He has been actively involved in the development of research activities at the intersection of electronics, Industry 4.0, IoT, and emerging fabrication technologies. His current work focuses on the design, prototyping, and validation of innovative electronic and photonic sensing systems for nuclear physics, industrial, and medical applications.

Gianluca Barile was born in Avezzano, Italy, he currently is a Researcher (RTD-B) in Electronics (ING-INF/01) at the Department of Industrial and Information Engineering and Economics (DIIIE), University of L’Aquila, Italy. He received his M.Sc. degree in Electronics Engineering in 2016 and his Ph.D. in Industrial and Information Engineering in 2020 from the same institution. His research interests focus on current and mixed-mode analog electronic circuits, integrated and discrete sensor interfaces, capacitive sensing systems, and electronic architectures for IoT and industrial applications.

Riccardo Olivieri was born in L’Aquila, Italy. He received the master’s degree in electronics engineering (cum laude) from the University of L’Aquila, Italy, in 2024, where he is currently pursuing a Ph.D. course in Electronics. His research interest includes the development of electronic interfaces for sensors, integrated circuits, and biomedical applications. He serves as a reviewer for several international journals as well as IEEE Transaction on Circuit and Systems II, Sensors and Actuators A: Physical, Sensors and Actuators B: Chemical, MDPI Sensors, MDPI Electronics, MDPI JLPEA, Journal of Circuit, Systems and Computers.